Sorry, there's a fair amount of that I don't understand.

Marty2dos wrote:

If in Window mode, the screen Gide Server is centered by the Main GliDOS Window.
Not good at a resolution eq 1280x1024. The Glide Server Screen is outside the display.

Use fullscreen mode and check the box that says: Kein Auflösungswechsel (wide screen) and choose a resolution that just fits within your natural screen resolution

I tried the vdos32 version and told me was with Unlock... what... is Unlock for vdos and why?
After the unlock screen it pops with a messsage "zwldentries returned 0x0000002"
what is now "zwldentries returned 0x0000002". ?

Regrettably, VDos32 works only on 32bit windows

The Screen Transitions with the FMV Packs is terrible. I have three Display and all displays Pops. On,Off,On,Off.. puhhh

The wide-screen setting I mentioned above will help with that.

If i replace the glide2x.ovl with a other version from
gog archiv and it runs in plain Dosbox Mode, the controls work but not in "Glide server window"..

No other version of glide2x.ovl will work with Glidos.

And please add -noconsole in your code. Running the game brings a fullscreen dosbox onsole.
--remote_fmv...DOSBox\dosbox.exe.......DOSBox\dosbox.exe <-noconsole> -conf DOSBox\dosbox-0.73.conf "%s" -c "mount d "%s"" -c "set PATH=d:\\.

You should be able to add -noconsole to dosbox-0.73.conf

I see in the UB Version the GliDOS logo. I think i buy the Prog. the logo is away?

Yes. No logo once you've unlocked.

Ok,

to 1: this is is ticked and the problem persists.

to 2: VDos32 is a 32Bit only Application, oh no....
this is totally unnecessary in the GliDOS Paket.
Huh, sorry, I had not even read. Stand somewhere.

to 3: this is is ticked and the problem persists.

to 4: Yes i know, this was only a test. But the Controllers
and keyboard doesn't recognized if 'Glide Server Windows'
appears. Because a Focus Problem?

to 5: this is a joke? Yes i can add and change the commando
but with a HexEditor, 🤣. You Execute Dosbox internal from
GliDOS. Told me how i can add the cmd without start dosbox
in GliDOS? In a Dosbox Configuration, is not bale to add
the cmd. this work only from Dosbox.exe cmd.

to 6: i like to say. I have buyed the prog and the logo is not
away.

Sorry, is meant no harm. but you did programmed the GliDOS?

Missed:
Exitsts a command. how: glidos.exe <glideos_1_xx.ini> <game name description from ini>.
If not make it so, please

Do you have a debug version?

Marty2dos wrote:

Ok,

to 1: this is is ticked and the problem persists.

Maybe I misunderstood the problem. Maybe you mean, when in windowed mode, the Graphics window keeps being created off the side of the display. There's a fix for that. Move the initial Glidos dialog to the top right of the screen.

to 2: VDos32 is a 32Bit only Application, oh no....
this is totally unnecessary in the GliDOS Paket.
Huh, sorry, I had not even read. Stand somewhere.

VDos32 uses Windows features that aren't available in 64bit versions.

to 3: this is is ticked and the problem persists.

In Windowed mode you are going to have the pain of the window disappearing and reappearing when swapping between game play and FMVs.

to 4: Yes i know, this was only a test. But the Controllers
and keyboard doesn't recognized if 'Glide Server Windows'
appears. Because a Focus Problem?

You should be able to just click on the graphics window to reassign focus.

to 5: this is a joke? Yes i can add and change the commando but with a HexEditor, lol. You Execute Dosbox internal from GliDOS. […]
Show full quote

to 5: this is a joke? Yes i can add and change the commando
but with a HexEditor, 🤣. You Execute Dosbox internal from
GliDOS. Told me how i can add the cmd without start dosbox
in GliDOS? In a Dosbox Configuration, is not bale to add
the cmd. this work only from Dosbox.exe cmd.

dosbox-0.73.conf is a text file.

to 6: i like to say. I have buyed the prog and the logo is not
away.

You need to log into the website, enter the Glidos ID displayed by the program, obtain the key and install it.

Sorry, is meant no harm. but you did programmed the GliDOS?

Yes.

Missed:
Exitsts a command. how: glidos.exe <glideos_1_xx.ini> <game name description from ini>.
If not make it so, please

Sorry. I don't understand.

thanks for that,

to 1: this a curious fix. do you think you can fix in the.

to 2: Which features use VDos32 in the 32bit version there
doesn't exists in a 64bit version?

to 3: this can but be fixed.

to 4: test it, doenst works. Left or Right works but the buttons doesn't
recognized. Keyboard is not working too.

to 5: How can i add the command -noconsole in the dosbox-0.73.conf.
in which ini section? I know is a text file. I mean HexEdit on Glidedos.exe

to 6: After the second unlock it works. puhh 😀

What did'nt you understand? my Question is
Exitsts a command line switches to start the from the

"glidos.exe <glideos_1_xx.ini> <game name description from ini>"

If not make it so, please. so similar to scummvm. with other words

glidos.exe GLIDOS_1_52.ini Name="Tomb Raider (GOG)"

Snip Ini -----------------------------------
Name: Tomb Raider (GOG)
Executable: B:\TR1\DOSHD\TOMB.EXE
ExeSizes:
CDPath: B:\TR1\IMAGE\TR1_PC_CD1.cue
Driver: Direct3D
MipMapping: No
PaletteTricksCache: Yes
ManagedTextures: No
NoModeChange: No
16BitColour: No
Snip Ini -----------------------------------

Edit: Can you add at the Glide Server Window an "Close" Button