First post, by Sphere478
- Rank
- l33t++
Edit: solved
Here are the multiplier settings for the 2.2v 400gp:
If we assume that dip switches 5,6,7 on my freeway design motherboard correspond to bf0,bf1,bf2 respectively then:
1= on 0 = off
Bf0, bf1, bf2
? ? ? = 1x (might only work on some mobos, or may not exist on this chip)
1 0 0 = 2x
1 1 0 = 2.5x
0 1 0 = 3x
0 0 0 = 3.5x
1 0 1/ 1 1 1 = 4x
Here are the multiplier settings for a 2.9v cyrix 366gp
1=on 0=off
(66fsb test actual mhz, not PR)
Bf0, bf1, bf2
0, 0, 0 233mhz 3.5x
1, 0, 0 133mhz 2.0x
0, 1, 0 200mhz 3.0x
1, 1, 0 166mhz 2.5x
0, 0, 1 66.7mhz 1.0x
1, 0, 1 266mhz 4.0x
0, 1, 1 66.7mhz 1.0x
1, 1, 1 266mhz 4.0x
OP:
Anyone have a cheat sheet for all the multiplier settings for a 400gp on a asus p5a?
Given that the post screen is displaying only a pr rating this is becoming difficult with the 27 possible combinations.