VOGONS

Zida 4DVS 2.0 with missing part

Topic actions

First post, by JimWest

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Hey there,

I've had a Zida 4DVS 2.0 motherboard lying around for a while.
Q4 is missing. I guess it's a voltage regulator or something like that.
Do any of you happen to have this mainboard and could you check what the name of the component is?
A picture would also be welcome.

The attachment IMG_9372.jpg is no longer available

I know the socket lever broke off too, but I'll take care of that later. 😀

Thank you!

Reply 1 of 3, by DAVE86

Posted on 
User metadata
Rank Member
Rank
Member

Hi,

I've got this board with a lm1117 regulator installed. However this might not how it originally was. I've seen it with an lt1085ct-3.3 also. R5 resistor is used to set the output voltage on an adjustable regulator. JP38 shorted should set the cpu voltage for 5V. Better wait for the others to comfirm this.

Reply 2 of 3, by JimWest

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Thanks DAVE86!
Can anyone else confirm this?

Reply 3 of 3, by JimWest

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Just a quick update. I installed an LT1086CT (adjustable variant) and the output is now at 3.35V.
The motherboard is working perfectly so far.

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window